SHARC Industries Registerd Trademark 

 

SHARC Industries LLC 440-377-5657

 

Premium Quality Aftermarket Bandsaw Parts and OEM Components

Stocking Parts for Amada, Behringer, Clausing, Daito, Danobat, DoAll, Everising,

Friggi, Forte, Hem (HE&M), Hydmech, Kalamazoo, Kasto, Kysor Johnson, Marvel,

Mastercut, MEP, Missler, Peddinghaus, Peerless, Pheonix, Spartan, Tannewitz,

Wells, W.F. Wells and many more... We also produce parts to sample.

Please take advantage of our site search using keywords, description, OEM numbers or SHARC numbers. 

 

 
  • 03SDVC-100/110 Directional Valve Coil
    Directional Valve Coil for SHARC Supplied Directional Valves - DV3 Series 100/110 VAC
  • 10002a
    P-Cock Style 10002a / 10360901
  • 10579322/5.1K2W
    Resistor for Amada HFA Series
  • 1230077B
    Oil Level Hose for 400 Series Amada Band Saws
  • 1238217
    Left Guide Arm (Guide Bracket L) for Amada 400 Series - Serial numbers starting 407 & 457
  • 22MM-PBLC
    Securely Lock Out Control Buttons with this simple to install Lockable Cover. Fits most 22MM push buttons.
  • 30MM-PBLC
    Securely Lock Out Control Buttons with this simple to install Lockable Cover. Fits most 30MM push buttons.
  • 4.5X20-SP
    Spring Pin for Amada 250 Series Brush Assembly Replaces Part Numbers: 10314114, 0604556 & 604556
  • 4TC-25-48-7
    Oil Seal 4TC25-48-7
  • 50V10000
    Aluminum Capacitor for Amada Saws - No Return Electrical Item
  • 6201ZZ
    Ball Bearing Replaces Part Numbers: MB2620DU, 10313331
  • A-250-BS & A-400-BS
    Brush Shafts for Amada 250 Saws Replaces Part Numbers: 10360405, 604557a, 10380576, 1230516A, 10335229, 10314108 & 10382310
  • A-250-BB
    Blade Brushe Belt for Amada 250 Saws Replaces Part Numbers:
  • A-250-BRK-1 & A-250-BRK-2
    Brush Rebuild Kits for Amada 250 Saws Replaces Part Numbers: Shaft 10360405, 604557a, 10380576, 1230516A, 10335229, 10314108 & 10382310, Bushing MB1215DU or 10314026, M6 WIng Nut, Belt 10314205, 10383227, P223000011
  • A-250-BRK-PS
    Pulley Side Brush Rebuild Kits for Amada 250 Saws
  • A-250-BH1 & A-250-BH2
    Entire Assemblies down to the brush and wing nut. SHARC upgrades for easier operation, longer life and lower maintenance costs.
  • A-NUJ-C-10-CX2
    Universal Joint for Amada 250 Saws Replaces Part Numbers: 10314024 or NUJ-C-10-CX2
  • A-1105591a
    Seal Rubber for Amada 250 Series Brush Assembly Replaces Part Numbers: 1105591a, 1105591, 10380572, 10383229, 10413520 or 10360421
  • A-250-BBC-1
    Brush Belt Cover for Amada 250 Series Band Saw Replaces Part Numbers: 10360403, 7922502a, 10383228, 1108486, 10360402, 50130b
  • A-250-BSS
    Brush Shaft Support Amada 250 Series Band Saw Replaces Part Numbers: No OEM Counter part - Fits SHARC Brush Housing Only
  • A-3.00WW-SD & A-3.00WW-HD
    Blade Brushes for Amada 250 Saws Replaces Part Numbers: AC-2196-9 or 120096A, 10360519, 10428826, 10205206
  • A-250-SBF1
    Quick Approach Feeler for 250 Series 1.250" Blade - Rear Bolt On Replaces Part Numbers: 1115189, 10389711
  • A-250-SBF2
    Quick Approach Feeler for 250 Series 1.250" Blade - Rear Bolt On Replaces Part Numbers: 1106634B, 10363562, 10382445, 10384724
  • A-250-QAB-2
    Flat Quick Approach Bar for 250 Series Replaces Part Numbers: 1105805a, 1105805 A, 10313318, 1105804 C, 1105804C
  • Amada 250 Drive Belts and Vari Speed Drive Belts
    1922V443, 1922-V443, 10310537, QZZ042659, 10579566, 1922V443K, 2322V441, 2322-V441, 10579567, QZZ042660, 2322V441K, 10383907
  • Amada 250 Vari Speed Pulleys
    Vari Speed Pulleys for Amada 250 Band Saws - AK-185-K, 10310608 or PDS-22-05, PE-250-K, AK-185-V, 10358450, 7922575, PE-250-P
  • A-250-RBF1
    Quick Approach Feeler for 250 Series 1.000" Blade Replaces Part Numbers: 10313311, 1105803, 1105803B
  • A-250-RBF2
    Quick Approach Feeler for 250 Series 1.250" Blade Replaces Part Numbers: 1105301, 10363403
  • A-250-QAB-1
    Round Quick Approach Bar for Amada 250 Series Replaces Part Numbers: 1105805a, 1105805 A, 10313318, 1105804 C, 1105804C
  • A-250-DWBK
    Drive Wheel Bearing Kit for All Amada 250 Saws
  • A-250-DW-1.00
    Drive Wheel for Amada 250 Series - 1.00" Blade / Style 604062c or 10311113
  • A-250-DW-1.25
    Drive Wheel for Amada 250W Series - 1.250" Blade / Style 1105276 or 10355662
  • A-1109945 (SHARC Parts for Amada Saws Amada Saw Wheels)
    Drive Wheel for Amada 250 Series - Newer Style 1109945B or 10389551
  • A-1105012b
    Side Cover for Amada 250 Series 1105012B, 1105012, 10309835
  • A-1105015b
    Rear Cover (R) for Amada 250 Series 1105015b, 1105015, 10309853
  • A-1105013a
    Cylinder Cover for Amada 250 Series 1105013A, 1105013, 10309826
  • A-0004003A
    Idler / Driven Wheel Bearing Cap for Amada 250 Series using Rack & Pawl Vises
  • A-01026b
    Coolant Tank Perforated Plate for Amada 250 / Older - No Auger - Styles 10309428, 01026b, 0001026 B
  • A-04004f
    Wheel Shaft
  • A-05018
    Roller Pin for Rack and Pawl Amada 250W Saws - Longer Rear Pin
  • A-07071
    Adjustment Screw for Amada H1080 Brush Housing - Style: 10452204, 07071
  • A-11005
    Lead Screw Cover for Older Amada HA250 saws using rack and Pawl Vises
  • A-1106266
    Blade Cover (R) for Amada 250 Series - Style 1106266 or 10355620
  • A-1106266-HK
    Hardware kit for Blade Cover / Blade Guard 1106266
  • A-1108183-BG
    Left Side Blade Guard for Amada 250 Saws / Style 1108183, 10356910, 0050126A, 0050126, 50126, 50126A, 10384392
  • A-1108183-HK
    Hardware Kit for A-1108183 Blade Guard - Wing Bolt Style 10384394, P338020005, 10357012 - Nut Plate Style 0050129, 50127, 1384393, 10356912
  • A-250-LGP
    Left Guide Pusher Assembly for Amada 250 Series Band Saws Replaces Part Numbers: Older Style 250's Knob 604249, Spring 604247 & Pusher 604246 Newer Style 250's Knob 1105285, Spring Cover 1105283, Spring 1105284 Pusher 1105287
  • A-250-RGP
    Right Guide Pusher Assembly for Amada 250 Series Band Saws Replaces Part Numbers: Older Style 250's Knob 604248, Spring 604247 & Pusher 604245 Newer Style 250's Knob 1105286, Spring Cover 1105283, Spring 1105284 Pusher 1105288
  • A-250-RBK
    Roller Guide Kit for Older Amada 250 Series Replaces Part Numbers: 6200, 6200DDU, 6200VV, 10312823, 10328320, 10382175, 10380431
  • A-HFA250-RBK
    Roller Guide Kit for Older Amada HFA 250 Series Replaces Part Numbers: (8PC) 6200, 6200DDU, 6200VV, 10312823, 10328320, 10382175, 10380431 (1PC) 6000, 10357517
  • A-01009
    Rack Guide Ring for Amada Rack & Pawl 250 & 400 Series Saws
  • A-04008a
    Plate - Motion Detector Pickup for Amada 250 Series Saws using Rack & Pawl Vises
  • A-10303282
    Pilot Light / Indicator Apparatus for Amada Saws
  • A-10318924
    Piece / Parts Counter for Amada Saws AC100/110V
  • A-10337524
    Rotary Select Switch for Amada Saws
  • A-10354952
    Straight Pin for Amada 250 Front Vise Pawl
  • A-10356011
    Drive Hub Oil Seal for Amada 250 Saws - Style 10356011, 10383039, P590112004, TB13016014
  • A-10361107
    Parallel Nipple for Amada Saws
  • A-10362305
    Pin for Amada 250 Rear Vise Pawl / Style 10362305 12X56
  • A-10363415-LS
    Upper/Raise Limit Switch for Older 250 Saws Style 10363415, Z-15GD55-MR3, Micro Switch
  • A-10363901
    Piece Counter Toggle Switch for Amada HA250 saws using Rack & Pawl Vises
  • A-10364227
    Control Relay for Amada 250 Series - Older Saws with Rack & Pawl Vises
  • A-10364229
    Control Relay for Amada 250 Series - Older Saws with Rack & Pawl Vises
  • A-10379202
    Gear head for Amada 250 Chip Conveyor (Outboard Motor)
  • A-10379203
    Auger Drive Motor for Amada 250 Chip Conveyor (Outboard Motor)
  • A-10380396-Prox
    Proximity Switch for Amada Saws / Style 10380396, FL7M 2D6-CN, P829003042, 10382160
  • A-10389518
    Length Counter for Amada HA Series Saws
  • A-10389734
    Control Relay for Amada Saws / Style 10389734 / 24VDC
  • A-10389764
    Auto / Manual Select Switch for Amada 250 - Style 10389764 or ASS30-210W - Fits HA250W 253 Series with full stroke vises.
  • A-10389766
    Rubber Covered Pushbutton for Amada Saws
  • A-10389774
    Rubber Cover for Push Buttons
  • A-10421120
    Control Relay Assembly (Base and 4 Relays) 24VDC for Amada Saws
  • A-10421120-RO
    Relay Only for Amada Saws
  • A-10448406
    Double Link Chain for Amada 1080 Feed Rollers, 10448406, 10422232
  • A-10500456
    Collar for Amada Saws
  • A-10578819
    Indicator Apparatus
  • A-10579323
    Switching Power Supply for Amada Saws
  • A-10579325
    Switching Power Supply for Amada Saws
  • A-10580310
    Proximity Switch for Amada Saws
  • A-1080-BH1
    Complete Brush Housing Assembly for Amada H1080 - Older Saws 2.625" Blade
  • A-1080-BRK
    Brush Rebuild Kit for Amada H1080 - Shaft Style 07013a, Bushings, Wing Nut and Pin
  • A-1080-RBK
    Roller Guide Bearing Kit for Amada H1080
  • A-10MM-CL
    10MM ID Coolant Line / Teflon Braded Hose
  • A-11003B
    Gauge Screw - Fits Amada HA Series 250 Using Rack & Pawl Vises
  • A-11008a
    Guide Shaft (R) - Fits Amada 250 Style 10362804 / 0011008A, 11008C
  • A-11009a
    Guide Shaft (L) - Fits Amada 250 Style 10362805, 0011009C, 11009A
  • A-1105025a
    Coolant Tank Top Perforated Plate for Amada 250 / Older - No Auger
  • A-1105026
    Coolant Tank Filter Screen for Amada 250 / Older - No Auger
  • A-1105028B
    Fixed Vise Jaw for Older 250 Saws - Style 10379115 or 1105028B
  • A-1105092
    Rear Vise Horizontal Slide Plate (Front) for Rack and Pawl HFA250 Amada Saws
  • A-1105093
    Rear Vise Horizontal Slide Plate (Rear) for Rack and Pawl HFA250 Amada Saws
  • A-1105297
  • A-1105391B
  • A-1105660b
    Roller Bracket / Pillow Block for 250 Series Rear Rollers
  • A-1105662A
    Roller (In Feed Roller) - Fits Amada 250 Series Saws using Rack & Pawl Vises
  • A-1105664
    Roller Bracket / Pillow Block for 250 Series Rear Rollers
  • A-1105942
    Spiral Shaft for Amada 250 / Older Saws with Outboard Auger Motor
  • A-1105944
    Chute for Amada 250 / Older Saws with Outboard Auger Motor
  • A-1105947
    Motor Cover (Style 1105947, 10379329)
  • A-1106552
    Bucket - Stainless Steel Mesh Bucket for Amada 250 Saws / Style 1106552, 10382322 or 10383235
  • A-1106669b
    Spiral Shaft (Chip Auger) for Amada 250 Series
  • A-1108168
    Saw Blade Cover (L)
  • A-1108175
    Distance Collar - Fits Newer (Full Stroke) Amada 250 Saws and VM420 Drive Wheel
  • A-1108484
    Brush Bracket for Amada Saws
  • A-1108551B
    Grooved Vise Plate (Rear Vise Plate for Amada 250, fits 252 & 257 Series, Full Stroke Vises)
  • A-1108553
    Slide Plate (F) for Amada 250 Series Bandsaws with full stroke vises.
  • A-1108554B
    Slide Plate (R) for Amada 250 Series Bandsaws with full stroke vises.
  • A-1108555B
    Remaining Material Support for Amada 250 Series Bandsaws with full stroke vises.
  • A-1108594A
    Vise Plate Without Grooves (Rear Vise Plate for Amada 250 Series, Full Stroke Vises)
  • A-1108598
    Chip Box Filter Screen for 250 Series
  • A-1108718A
    Spiral Shaft (Chip Auger) for Amada 250 Series Bandsaws
  • A-1109908
    Saw Blade Cover (R)
  • A-1109936A
    Roller Bearing Shim - Shim (2) Style 1109936A
  • A-1109937
    Roller Bearing Shim - Shim (1)
  • A-1109946
    Driven Wheel for Amada 250 Series - Saws Using Full Stroke Vises and 1.25" Blade
  • A-1115150
    Intermediate Brush Shaft for Amada HA250W 2575 Serial Numbers
  • A-1115122
    Spiral Shaft (Chip Auger) for Amada Saws
  • A-1115164
    Holder Base for Amada 250 Series with Full Stroke Vises
  • A-1115166
    Vise Plate (F) - Style 1115166 or 10389506 / Front Fixed Vise, Front Plate
  • A-1115168A
    Vise Plate (R) - Style 1115168A or 10389504 / Front Fixed Vise Rear Plate
  • A-1115169
    Work Receiver Plate for Amada 250 Series - Full Stroke Vises / Style 1115169
  • A-1115252
    Chip Receiver Basket for Amada 250 / Style 1115262 or 10389806
  • A-11154516
    M6 Wing Nut / Left Hand Thread - Style 11154516
  • A-11250525-26
    Two Plastic Hydraulic Lines With 4 Compression Nuts for Auger Drive Unit - Replaces Lines (11250525 or 4212-462 150L & 11250526 or 4212-462 180L) and includes four new nuts with compression fittings installed.
  • A-1200-BB
    Brush Belt for Amada VM1200 & VM2500
  • A-1200-CCSK-1
    Seal Kit for Amada 1200/2500 Hydraulic Chip Auger Motor
  • A-1200-DB
    Drive Belt for Amada VM1200 & VM2500
  • A-1200006
    Work Support Plate for Amada HA500 / HFA500
  • A-1200418B
    Screen / Coolant Tank Chip Screen - Style 10331030, 10317946, 1200418 B, Screen
  • A-1200772
    Back-up Rubber
  • A-1203176
    SBrush Retainer - Style 1203176, 10300003
  • A-1206092
    Moveable Roller for Amada PCSAW330
  • A-1206107A
    Backup "Chip" for Amada PCSAW330
  • A-1208109
    tationary Vise Plate (F) for Amada PCSaw530X
  • A-1208117
    Moveable Vise Plate F for Amada PCSAW530AX
  • A-1208261
    Anti Vibration Roller for PCSaw530X (Does not fit 530AX)
  • A-1209078
    Brush Shaft L 1209078A for Amada Saws
  • A-1209079
    Brush Shaft R 1209079A for Amada Saws
  • A-1209570
    Brush Shaft F for PCSAW430X & PCSAW530X - Right Handed Thread
  • A-1209571
    Brush Shaft R for PCSAW430X & PCSAW530X - Left Handed Thread
  • A-1230012A
    Slide Pate - 406/456 Series
  • A-1230024
    Vise Pawl Pin / Style 1230024, 10321947
  • A-1230066
    Distance Collar for Drive Wheel Bearings - Fits Amada 400 Series 406, 456, 407 & 457 Serials, HK800, HKB6050
  • A-1230110a
    Drive Wheel for Amada 406 Series 1.250" Blade / Style 1230110a, 10322501
  • A-1230152
    Chain for Amada 400 Series Speed Change Device
  • A-1230189
    Tension Cylinder Valve Lever for Amada Saws
  • A-1230190
    Stopper Plate for Amada Saws
  • A-1230194a
    Cover Plate / Motion Detector Plate for Amada Saws
  • A-1230196A
    Switch Setting Plate (Proximity Switch Bracket for Motion Detector) for Amada Saws
  • A-1230197
    Feeler (Proximity Switch Pick up plate for Motion Detector) Fits Amada 406/456 & VM1200/VM2500 Series Saws
  • A-1230198A
    Third Shaft (Idler Wheel Shaft for Amada Saws)
  • A-1230199a
    Idler/Driven Wheel Bearing Cap for Amada 406 / 456 Series Saws
  • A-1230239c
    Idler - Driven Wheel for Amada 406 Series 1.250" Blade / Style 1230239c, 10325924
  • A-1230258A
    Coolant Valve / P-Cock for Amada Bandsaws
  • A-1230261a
    Back-up tip holder (R) for Amada Saws
  • A-1230262a
    Back-up Tip Holder (L) for Amada Saws
  • A-1230358
    Tension Cylinder Check Nipple for Amada 406/456 Series Band Saws
  • A-1230409a
    Rear Vise Steel Pipe for 406 Series Amada Saws / Style 1230409a, 10328831
  • A-1230430
    Bellows for Amada 400 Lift Cylinder (Also Fits 330 Series)
  • A-1230433-LCS
    Lift Cylinder Spring for Amada Saws / Outer Spring / Sawhead Cylinder Spring (1)
  • A-1230434-LCS
    Lift Cylinder Spring for Amada Saws / Inner Spring / Sawhead Cylinder Spring (2)
  • A-1230511
    Brush Cover for Amada 400 Saws - 406/456 Series
  • A-1230513
    Lock Lever for Amada brush Assembly
  • A-1230514B
    Brush Bracket for Amada 406/456 Series
  • A-1230515A
    Cover Hinge Pin for Brush Assembly / Style 1230515A - Includes Push Nut
  • A-1230661A
    Slide Plate (F) for Amada 406/456 Series Bandsaws
  • A-1230662B
    Audillary Plate for Amada 406/456 Series Bandsaws
  • A-1230676
    Reamer Bolt for Amada Saws
  • A-1231724
    Drive Wheel for Amada 406 / 407 Series 1.500" Blade
  • A-1231725
    Idler - Driven Wheel for Amada 406 Series 1.500" Blade
  • A-1233173
    Out Square Detector Roller for Amada Bandsaws
  • A-1233232
    Backup Roller Shaft for Amada Saws
  • A-1233569
    Screen or Screen(A)
  • A-1233920
    Small Guide Roller Assembly for Amada HFA400S & HFA400CNC and HFA500S & HFA500CNC
  • A-1233920R
    Rebuild kit for SHARC Small Guide Roller Assembly for Amada HFA400S & HFA400CNC and HFA500S & HFA500CNC
  • A-1233927
    Large Guide Roller (Roller Only) for Amada HFA400S & HFA400CNC
  • A-1233927-AS
    Large Anti-Vibration Roller Assembly for All HFA400S & HFA400CNC
  • A-1233929
    "Roller 500" Large Guide Roller (Roller Only) for Amada HFA500S & HFA500CNC / 2.00" Blade
  • A-1233929-AS
    Large Guide Roller for Amada HFA500S & HFA500CNC / 2.00" Blade
  • A-1233929R
    Rebuild Kit for A-1233929, A-1239028C and A-1233927
  • A-1238160
    Distance Collar - For Amada 407/457 Driven Wheel
  • A-1238292B
    Flare Pipe / Pipe for 407 Rear Moveable Vise
  • A-1238398B
    Brush Bracket - Amada 407/457 Series
  • A-1238399
    Brush Cover for Amada 407 and 252 Series Bandsaws
  • A-1238479
    Slide Plate for Amada 407/457 Front Vise
  • A-1239028C
    Large Anti Vibration Roller (Roller Only) for Amada HFA330 Saws
  • A-1239028C-AS
    Large Anti Vibration Roller Assembly for Amada HFA330 Saws
  • A-1240273a
    Brush Shaft for Amada VM Series / Style 1240273a or 11162407
  • A-1240276
    Miter Gear for Amada Saws
  • A-1240277
    Gear Shaft for Amada Bandsaws Brush Assembly / Style 1240277
  • A-1240280B
    Pulley Shaft for Amada VM Series
  • A-1240396a
    Chip Conveyor Spiral Shaft for Amada VM1200 & VM2500 Plate Saws
  • A-1241191
    Clamper Block for Amada VM Series Saws
  • A-1242472
    Spiral Shaft (Chip Auger) for Amada VM3800 Series
  • A-1250222
    Brush Shaft (Brush Rod) for Amada HA700 & HFA700 Bandsaws. (Serial Numbers starting with 701)
  • A-1250560
    Spiral Shaft / Chip Auger for Amada 700 Series
  • A-1257554
    Backup Guide (Chip) for Amada PCSAW700 - Style 1257554
  • A-125740231
    Brush Cover (R) for Amada PCSAW700
  • A-1260053
    Vise Clamp Cylinder for Amada HA & HFA 16S
  • A-1280215b-QAF
    Quick Approach Feeler for Amada 330 1.25" Blade
  • A-1280684b
    Spiral Auger Shaft for Amada Saws
  • A-1280686
    Shaft Support (A) - For Amada Chip Conveyor
  • A-1280689
    Shaft Support (B) for Amada Chip Conveyor
  • A-1280696A
    Chip Box Screen
  • A-1280728
    Vise Plate - HFA330 & PCSAW330 Rear Vise Plate
  • A-1286526
    Driven / Idler Wheel for Amada 400 (407/457 Series) Band Saws - 1.500" / 41mm Blade
  • A-1295265B
    Bucket / Stainless Steel Mesh Bucket for Amada Saws
  • A-133241311
    Pad for Amada CM100 - Large Guide / Fixed Side of Blade Cove
  • A-133241312
    Pad for Amada CM100 - Large Guide / Moveable Side of Blade Cover
  • A-13426866A
    Brake Disc (Rotor) for Amada CM100AN, CM100CNC, CM150AN & CM150CNC
  • A-134268981
    Amada CM100 Carbide Guide (Pat A) - Small Guide Fixed Side of Cover
  • A-134268982
    Carbide Guide (Pat A) - Amada CM100 Small Guide on Moveable Side of Cover
  • A-13426946A1
    Roller Support Shaft for CM100-AN & CM100-CNC (13426946A1, 15129939)
  • A-1350712A
    Large Anti Vibration Roller for Amada CTB400
  • A-1350728
    Guide Roller (A) (smaller) for Amada CTB400
  • A-1350729
    Carbide Backup Roller for Amada CTB400 Band Saws
  • A-1350904B
    Datum Vise Plate for Amada CTB400
  • A-1350919
    Movable Vise Plate (Lower) for Amada CTB400
  • A-1350954
    Datum Vise Plate for Amada CTB400
  • A-1350968
    Movable Vise Plate (Lower) for Amada CTB400 Front Vise
  • A-1350987b
    CTB400 Chip Conveyor Scraper
  • A-1429322
    Front Vise Slide Plate for Amada 250 Series - Full Stroke Vises
  • A-1440914
    Blade Cover (R) WIth Spring Loaded Hinge
  • A-16S-BB
    Brush Belt (V-belt)for Amada HA16S & HFA16S / HA400S & HFA400S
  • A-16S-DB
    Drive Belt for Amada HA16S & HFA16S / HA400S & HFA400S
  • A-2MY750-C
    Spider Coupling for 2MY-750 (10314896) Hydraulic Pump Assembly - Fits Older 250 Saws with Nippon / Trichoid Oil Pump
  • A-250-110V-CPK
    110VAC Coolant Pump Conversion for Amada 250 Series
  • A-250-12007d
    Rear Vise Work Support Plate / Older 250 Rack & Pawl Vises
  • A-250-230/460 CP
    230/460 VAC Coolant Pump for HA250W & HFA250W Saws Equipped with 3 Phase Coolant Pump from Factory. Replaces Numbers: 7920875,10360937, 7922762, 10383859, 10389667, JW-0043
  • A-250-AMSS-01
    Auto-Manual Select Switch for Amada 250 Saws / HA series Rack & Pawl Vises
  • A-250-BSB-01
    Blade Start Button for Amada 250 Saws / HA Series Rack & Pawl Vises
  • A-250-CB
    Coolant Pump Belt for Amada 250 Series
  • A-250-DLC-01
    Digital Length Counter for Amada HA250 Series using the C3-4AR Digital Counter
  • A-250-FCBN
    Feed Cylinder Bushing Nut for Amada 250 Series / Older Rack & Pawl Vises
  • A-250-FCK
    Feed Cylinder Seal Kit for Amada 250 Series
  • A-250-FSS-01
    Vise Feed Select Switch for Amada 250 Saws / HA Series Rack & Pawl
  • A-250-FVHP-1
    Slide Plate (F) / Front Vise Horizontal Wear Plate / Older 250 Rack & Pawl Vises - Front Plate
  • A-250-FVHP-2
    Slide Plate (R) / Front Vise Horizontal Wear Plate / Older 250 Rack & Pawl Vises - Rear Plate
  • A-250-FVWP
    Front Vise Vertical Wear Plate / Older 250 Rack & Pawl Vises
  • A-250-IBS-1
    Intermediate Brush Shaft for Amada 250 Saws Replaces Part Numbers: 10314114, 0604556 & 604556
  • A-250-HLB-01
    Head Lower Button for Amada 250 Saws / HA Series Rack & Pawl Vises
  • A-250-HRB-01
    Head Raise Button for Amada 250 Saws / HA Series Rack & Pawl Vises
  • A-250-HSB-01
    Hydraulic Start Button for Amada 250 Series / HA Series with Rack and Pawl Vises
  • A-250-IW-1.00
    Driven/Idler Wheel for Amada 250 Series - 1.00" Blade and Rack & Pawl Vises
  • A-250-IW-1.25
    Driven/Idler Wheel for Amada 250 Series - 1.250" Blade and Rack & Pawl Vises
  • A-250-IWBK
    Idle Wheel Bearing Kit for All Amada 250 Saws
  • A-250-LCK1
    Lift (Swing or Sawhead) Cylinder Kit for Amada 250 Series / All Saws Equipped with Rack & Pawl Vises
  • A-250-LCK2
    Lift (Swing or Sawhead) Cylinder Kit for Amada 250 Series / All Saws Equipped with Full Stroke Vises
  • A-250-MH-01
    Motor Starter for Hydraulic Pump / HA 250 Series Rack & Pawl Vises
  • A-250-OLH-01/230V
    Hydraulic Motor Thermal Overload for Amada HA250 Series Rack & Pawl Vises
  • A-250-OLH-01/460V
    Hydraulic Motor Thermal Overload for Amada HA250 Series Rack & Pawl Vises 10364221, TR-0/3 1.4~2.2A, RH-18/1.7M
  • A-250-PWL
    Vise Clamp Pawl for Amada 250 Saws
  • A-250-RHWP
    Rear Vise Horizontal Wear Plate / Older 250 Rack & Pawl Vises
  • A-250-RVWP
    Rear Vise Veritcal Wear Plate for Amada 250 Bandsaws with Rack & Pawl Vises
  • A-250-SCVR
    15 Tooth Rack / Standard Clamp Vise Rack for Amada 250 Saws - Machined From Cast Bar
  • A-250-SCVR-Super
    Super "Standard Clamp" Vise Rack for Amada 250 Saws (15 tooth)
  • A-250-T1/T2
    Timer for Amada 250 Saws / Older HA Saws with Rack & Pawl Vises - Replaces both the T1 & T2 Timers
  • A-250-T1/T2-MB
    Mounting Base for A-250-T1/T2 Timer - Needed if customer saw equipped with Anly Timers from Factory.
  • A-250-TSK
    Tappet Switch Cylinder Rebuild Kit for All Amada HA250 & HA250W Saws using Rack & Pawl Vises.
  • A-250-VCC
    Vise Clamp Cylinder for Amada 250 Band Saws Equipped with Rack & Pawl Vises
  • A-250-VCP
    Vise Clamp Piston for Amada 250 Band Saws Equipped with Rack & Pawl Vises
  • A-250-VCS
    Vise Clamp Spring for Amada 250 Band Saws Equipped with Rack & Pawl Vises
  • A-250-VRK1
    Vise Rebuild Kit for Amada 250 Band Saws Equiped with Rack & Pawl Vises
  • A-250-VSS-01
    Vise Clamp Select Switch for Amada 250 Saws / HA Series Rack & Pawl - Style OA-EB-3-8, 10318410, 10379271
  • A-250-WBK
    Shuttle Vise Way Bar Kit for Amada 250 Series
  • A-250-WSP
    Work Support Plate Set for Amada 250 Series Equipped with Rack & Pawl Vises
  • A-250-ZCVR
    Zero Clamp (16 tooth) Cast Vise Rack for Amada 250 Saws
  • A-250-ZCVR-Super
    Zero Clamp (16 tooth) Super Vise Rack for Amada 250 Saws
  • A-330-BUR
    Backup Roller Guide (Ball Bearing) Set for Amada 330 Bandsaws
  • A-330-BUS
    Backup Carbide Strip Set for Amada 330 Band Saws / 2 Strips & 2 Rubbers
  • A-3800-BB
    Brush Belt for Amada VM3800 Plate Saw
  • A-3800-DB
    Drive Belt for Amada VM3800
  • A-400-ASP
    Spiral Pipe for Amada 406 Series Band Saws Equipped with Outboard Auger Motor
  • A-400-BB
    Brush V-Belt Belt for Amada 400 Series Saws
  • A-400-BBC1
    Brush Belt Pulley Cover for Amada 400 Series
  • A-400-BH1
    Complete Brush Housing for Amada 406/456 Series
  • A-400-BH2
    Complete Brush Housing for Amada 407/457 Series
  • A-400-BRK
    Brush Rebuild Kit for Amada 400
  • A-400-BRK-PS
    Pulley Side Brush Rebuild for Amada 400 Series
  • A-400-BS
    Brush Shaft for Amada H, HA & HFA 400 Series Bandsaws
  • A-400-BSS
    Brush Shaft Support for Amada 400 Band Saws
  • A-400-BU
    Backup Carbide Kit for Amada 400 Saws / 406, 456, 407 & 457 Series
  • A-1230255
    Backup Guide Bushing (Sleeve) for Amada Band Saws
  • A-400-BU-Reg
    Backup Guide Pair for Amada 400 - Complete Assemblies for the 406, 456, 407 & 457 Series
  • A-400-BU-Super
    Super Backup Guide Pair for Amada 400 - Complete Assemblies for the 406, 456, 407 & 457 Series
  • A-400-CA-01
    Spiral Auger Shaft for Amada 400 Series / Style 1230783B or 10331007
  • A-400-DB
    Vari Speed Drive Belt for Amada 400 Series Saws / Series 406, 456, 407 & 457
  • A-400-DWBK
    Drive Wheel Bearing Kit for Amada 400 Series
  • A-400-FCK
    Feed Cylinder Rebuild Kit for Amada 400 Series
  • A-400-IBS-1
    Intermediate Brush Shaft for Amada 400 Series
  • A-400-IDK
    Inverter Drive Kit for Amada 400 Series Bandsaws
  • A-400-MS1-230V
    Blade Motor Contactor for Amada 400 Series - 230 VAC
  • A-400-QAF
    Quick Approach Feeler for Amada 400 Series - 1.25" Blade (Universal for 406/456/407/457 Series Saws)
  • A-400-TCRK
    Tension Cylinder Rebuild Kit for Amada 400 Series Saws Using a 1.25" Blade
  • A-400-VRK-RF
    Rebuild Kit for Amada 400 Series Rear Fixed Vise Pancake Cylinder - Fits 406 and 407 Series
  • A-400-WBK
    Rear Vise Way Bar Kit for Amada Band Saws - This Way Bar Kit Fits the Following Amada Saws: HFA400S, HFA400CNC, HFA500S, HFA500CNC, HFA400LCNC All 406/456/407/457 Seris Saws
  • A-400-WSP
    Work Stopper Plate for Amada 400 Band Saws - Universal Plate to fit all 406/456 & 407/457 Series Saws
  • A-400W-QAF
    Quick Approach Feeler for Amada 400W Series - 1.500" Blade (Universal for 406/456/407/457 Series Saws)
  • A-400W-TCRK
    Tension Cylinder Rebuild Kit for Amada 400 Series Saws Using a 1.50" Blade
  • A-400WSP-HK
    Hardware Kit for A-400-WSP
  • A-401-BU
    Backup Carbide Set for Amada HA16 / HA400 - 401, 402 & 403 Series
  • A-401-DB
    Drive Belt for Amada HA16 & HA400 Saws / Series 401. 402 & 403
  • A-401-HRB
    Head Raise Button for Amada / Kysor Johnson HA400 / HA16 - 401 Serial
  • A-401-RASK
    Seal Kit for Amada HA16 & HA400 Series Reciprocating Auger Motor
  • A-406-AMSS
    Auto/Manual Select Switch for Amada HA 406/456 Series 400 Saws
  • A-406-BG1
    Left Arm Blade Guard for Older 400 Saws / Lip Mount Flap Style Guard - Styles 1230214 B, 10327956
  • A-406-BG2
    Left Arm Blade Guard for Older 400 Saws / Arm Mount Hinged Style Guard
  • A-406-CCSB
    Chip Conveyor "Shaft B" for Amada 330 & 406/456 Series 400 Saws - Style 1280688A
  • A-406-CS1
    Coolant Chip Screen / Filter for Amada 400 Saws
  • A-406-FVWP
    Front Fixed Vise Vertical Wear Plate for Amada 406/456 Saws
  • A-406-HRB
    Head Raise Button for Amada HA 406/456 Series 400 Saws
  • A-406-IWBK
    Idler Wheel Bearing Kit for Amada 406/456 Series Band Saws
  • A-406-LCK
    Lift Cylinder Kit for Amada 406/456 Series
  • A-406-LY2
    Ice Cube Relay for Amada 400 Series / Rack & Pawl Vises - 8 Blade Style
  • A-406-MY2V
    Timer for Amada HA 406/456 Series Bandsaws - Replaces all timers on the board T1 through T5
  • A-406-MY4
    Ice Cube Relay for Amada HA 406/456 Series / Rack & Pawl Vises - 14 Blade
  • A-406-PB567
    Head Lower, Rear Vise Forward and Back Push Button for Amada HA 406/456 Series Saws
  • A-406-PWL
    Vise Clamp Pawl for Amada 406/456 Series / Rack & Pawl Vises
  • A-406-RV-SPS
    Fixed Rear Vise Slide Pate for Amada 406/456 Series / Rack & Pawl Vises
  • A-406-RVWP
    Front Vise Moveable & Rear Vise Vertical Wear Plate for Amada 406/456 Series Saws
  • A-406-VCC
    Vise Clamp Cylinder for Amada 406/456 Series Band Saws - Rack & Pawl Vises
  • A-406-VCLS
    Large Vise Clamp Spring (Spring 1) for Amada 406/456 Series
  • A-406-VCP
    Vise Clamp Piston for Amada 406/456 Series - Rack & Pawl Vises
  • A-406-VCR
    Vise Clamp Rack for Amada 406/456 Series
  • A-406-VCSS
    Small Vise Clamp Spring (Spring 2) for Amada 406/456 Series
  • A-406-VRK
    Vise Rebuild Kit for Amada 406/456 Series
  • A-406-VSS
    Vise Clamp Select Switch for Amada HA Series 406/456 Band Saws
  • A-406-WRP
    Work Receiver Plate for Amada 406/456 Series Saws / Rack & Pawl Vises
  • A-407-BG1
    Left Arm Blade Guard for 407/457 Series Band Saws / Arm Mount Hinged Style Guard
  • A-407-FVWP
    Front Vise Vertical Wear Plate for Amada 407/457 Series
  • A-407-IWBK
    Idle / Driven Wheel Bearing Kit for Amada 407 / 457 Series Bandsaws
  • A-407-LCK
    Lift Cylinder Rebuild Kit for Amada HA/HFA400 - 407/457 Series Saws
  • A-407-RBK
    Guide Roller Bearing Kit for Amada HFA400W - Side & Backup Rollers 407/457 Series Band Saws
  • A-407-RVWP
    Vise Wear Plate for Amada 407/457 Series
  • A-407-SRK
    Guide Roller Bearing Kit for Amada HFA400W 407/457 Series - Side Rollers Only
  • A-407-VRK
    Vise Rebuild Kit for Amada 407-457 Series HA/HFA400 and W - Rebuilds Single Cylinder
  • A-407-WRP
    Work Receiver Plate for Amada 407/457 Series Series
  • A-420-BU
    Backup Guide Kit for Amada VM420 saws equipped with Factory/Regular Backup guides. - Items Styles: 11161662 & 11161256
  • A-420BU-Reg
    Backup Guide Pair for Amada VM420 / Complete Assemblies for Upper and Lower guide arms.
  • A-420BU-Super
    Super Backup Pair for Amada VM420 Saws
  • A-450/650-BU
    Backup Guide Kit for Amada H450HD & H650HD Saws
  • A-500-BRK
    Brush Rebuild Kit for Amada HA500 & HFA500 Saws / 1.50" Blade
  • A-500-BU
    Backup Guide Kit for Amada HA500 & HFA500
  • A-501-DB
    Drive Belt for Amada HA & HFA 500 Saws / Older Saws 1.50" Blade - FIts Speed Change Assembly 10324968, 7922535
  • A-50126A
    Blade Guard (L) for Amada 250 Series
  • A-52311063
    O Ring for Amada Saws, Style 52311063, P590000064
  • A-530-BU
    Backup Kit for HFA530 Saws using Standard (OEM) Backup Guides
  • A-600665
    Distance Collar - Amada 406/456 Driven Wheel
  • A-601951a
    Plate Washer for Amada Saws
  • A-602157-AS
    Vise Cylinder Assembly for Amada 250 Series using Rack & Pawl Vises
  • A-604197A
    Cushion Rubber Collar (Fits Amada 250 tension assembly)
  • A-604064
    Distance Collar - Fits Older (Rack & Pawl) 250 Drive Wheel
  • A-604076a
    Cover Step with Rubber Bumper for Amada 250 Series (Saws with Rack & Pawl Vises)
  • A-604204
    Bearing Collar for Amada 250 Series Saws Idler/Driven Wheel
  • A-604237
    Insert Holder (R) - Right Guide Holder for Older Amada 250 Series
  • A-604238
    Insert Holder (L) - Left Guide Holder for Older Amada 250 Saws
  • A-604251
    Amada Roller Pin
  • A-604253b
    Coolant Nozzle for Amada 250 Series Fixed Guide Arm
  • A-604314
    Nut Plate for Amada Motion Detector Prox Switch
  • A-604338
    Bearing Retainer for Amada Saws
  • A-604558
    Brush Support Washer for Amada Saws
  • A-604593
    Coolant Valve (3-Way Cock) for Amada Band Saws
  • A-6050-RBK
    Backup Roller Bearing Pair for Amada HKB6050
  • A-636547
    Polyurethane Rope for Amada 400 Series
  • A-653441
    Filter
  • A-701-DB
    Drive Belt for Amada H, HA & HFA 700 / Older Japanese Saws 2.00" Blade
  • A-701-RBK
    Roller Bearing Kit for Amada H, HA & HFA 700 / Older Japanese Saws 2.00" Blade
  • A-701-T1-T5
    Timer for Amada HA/HFA 700 Series. Older Japanese Saws - 701 Series. Replaces all T1 thru T5
  • A-7040157A
    4.00" Blade Brush for Amada Saws
  • A-7720115
    Hydraulic Pump with Motor for Amada Saws
  • A-7720115-PO
    Hydraulic Pump Only for Amada Saws (Splined Shaft)
  • A-7720235
    Piece Counter (PC1) for Amada Saws - Replaces both Fotec HC-41P and Line Seiki MD-144M-509
  • A-7920788
    Piece / Parts Counter for Amada Saws - Fits saws using Line Seiki MD-144M-433
  • A-7921570-M
    Hydraulic Motor (Motor Only) for Amada 250 Series, Rack and Pawl Vises.
  • A-7922047
    Coolant Valve Setting Plate / Style 7922047
  • A-7922503C
    Switch Case for Motion Detector
  • A-7922587
    Spiral Auger Shaft for Amada Saws
  • A-7922625
    Wear Ring (Wearing) for Amada 407/457 Series Lift Cylinder - 10380557, 10378268, 7922625
  • A-7922885
    Ball Bearing for Amada Saws (7922885)
  • A-800935a
    Slide Tip / Slide Chip for Amada Saws
  • A-852184
    Rod - Amada 1080 Intermediate Brush Shaft
  • A-9X-TW
    9 Times Select Switch (Rotary Switch) for Amada HA Series Saws with Full Stroke Vises
  • A-A15K
    AW-15 & AN-15 Crown Nut and Washer Set
  • A-A7K
    AW-7 & AN-7 Crown Nut and Washer Set
  • A-A8K
    AW-8 & AN-8 Crown Nut and Washer Set
  • A-A9K
    AW-9 & AN-9 Crown Nut and Washer Set
  • A-CCK-001
    Chip Conveyor Kit for Amada Saws with Chain Driven Auger
  • A-CCK-002
    Chip Conveyor Kit for Amada HA500 & HFA500 Saws with Chain Driven Auger
  • A-CM100-BP
    Brake Piston for Amada CM Series Circular Saws
  • A-CM100-BPK
    Brake Pad Kit for Amada CM Series Circular Saws
  • A-CM100-BRK
    Brake Piston Assembly for Amada CM100AN & CM100CNC Saws
  • A-CM100-PSMS
    Pressure Switch Micro Switch for Amada CM100AN & CM100CNC
  • A-CVP-1
    Coolant Valve Setting Plate for Amada Saws
  • A-ESTOP-01
    Emergency Stop Button for Amada Saws - A-ESTOP-01
  • A-ESTOP-02
    E Stop Button for Amada Saws
  • A-ESTOP-03
    E Stop Button for Amada Saws
  • A-HFA250-RBK-2
    Guide Roller Kit for Newer HFA250W Saws - 9 Bearings - Replaces Styles 7922888, 10383831, 7922885, 10383825, 6200DDU, P400017012, 10383308
  • A-M24071
    Soft Touch Display Panel (Membrane) or "Display Setting Plate" for Older Amada HFA Series Saws - M24071, 10364820, 10336320 Fits: Older HFA Series 250, 330, 400 & 500 - Also Fits Panel: 7922775, 10380991
  • A-M4521-CP
    Gear Type Coolant Pump for Amada 250 Series
  • A-M6X1
    Grease Fitting / Grease Nipple for Amada saws / Style A-M6X1
  • A-NH-1520
    Hydraulic Filter for Amada Saws
  • A-OMM32A-C - Amada Oil Hydraulic Motor
    Hydraulic Auger Drive Motor for Amada Saws
  • A-P230252028 - Amada Plastic Hose
    Plastic Hose, Nylon Shield Tube for Coolant System on Amada Saws
  • A-PBL-6V-W Replacement Bulb for Amada Saw Buttons
    Replacement Bulb for Amada Saws - 6.3V
  • A-PC1K-250-2 - Piece / Parts Counter Installation Kit for Amada Band Saws
    Kit accompanies PC-1 to Replace Parts Counter on Older Amada 250 Saws with rack and pawl vises using ra square digital counter. - Not for Individual sale.
  • A-PCSaw-BU1
    New Backup Pair for Amada PCSaw430 & PCSaw530 / Older saws using square style, reversible backups. (1207750, 10589015)
  • A-PCSaw-BU2
    New Backup Pair for Amada PCSaw430 & PCSaw530 / Older saws using square style, reversible backups. (1207750, 10589015)
  • A-PCSAW330BU-Assem.
    Backup Guide Assembly for Amada PCSAW330 using a 1.500" Blade
  • A-PCSAWBU-Assembly
    New Backup Assembly Pair for Amada PCSaw430 & PCSaw530 (1207750, 10589015)
  • A-POL-01
    Power On (Indicator) Light for Amada Saws - Replaces: APN-116-W, 10337401, TFLPB30-110W, 10389762 - 30MM 110VAC
  • A-RT2522
    Power Source / Switching Regulator for Amada® Saws - Styles 10365047, 10337346, 10578807 or RT2-522(A) No Returns / Electric Item
  • A-TUP001
    Orange Touch Up Paint for Amada Saws / Aerosol Can
  • A-VA-28
    Sight Gauge for Amada 250 Transmission - Style VA-28
  • A-VC1
    Rectifier / Style VC1 KBPC2506 - Electrical Item - Non Returnable
  • A-VM1200-BU
    Backup Guide Kit for Amada VM1200 & VM2500 - Item Styles 601946, 1200772b
  • A-WDN-1
    Wash Down Coolant Nozzle for Amada Saws.
  • A-WDN-2
    Wash Down Coolant Nozzle for Amada Saws using 10mm ID washdown hose.
  • A-WH1503-WW
    Blade Brush for Amada Saws / Style WH-1503, 10379769, P359258001
  • A-YFPC-42D
    Replacement Coolant Pump for Older Amada H1080 & H1300 Saws / 230/460 VAC Style YEPC42D, 1446501
  • ABN-111-G
    Blade Start Button for Amada 400 Series Saws - Replaces both ABN-11G & AH303FG10
  • AH165-E5W22
    Work Light On/Off Switch - Pilot Light
  • AH165-L5W11AA3
    Work Light On/Off Switch - Pilot Light
  • AH165-P2B11
    Selector Switch for Amada HA or HFA Series / Style 10578816, 10380989, P820004027
  • AH165-TFG11
    Push Button Switch for Amada HFA400CNC & HFA500CNC
  • AH165-ZWH3
    Indicator Apparatus (Power on Light)
  • AH303-FB10
    Push Button for Amada Saws
  • AH303-FG10
    Push Button for Amada Saws
  • AH303-P2B10
    Select Switch for Amada HFA400, HFA250 Using Rack & Pawl Vies and & HK1000
  • ALFD2661DN-G
    Hydraulic Start Button for Amada HFA Series Saws using Rack & Pawl Vises
  • AMD-SL3A
    AMD Timer for Amada Saws - Style AMD-N or AMD-SL3A
  • APB30-110B
  • APB30-210B
    Push Button - Blade Start Button for Amada HA Series 250 & 400 Saws using Full Stroke Vises
  • AR22F0R-10B/Z9
    Push Switch (Button)
  • AS-J-02-3
    Copper Seal Washer
  • AS-V-01-KA-1/8
    Cooland Control Valve, "P Cock"
  • AZ7310
    Limit Switch for Amada Saws
  • BRH-40V
    Urethane Bearing
  • C-0116A-PABSC-00C
    Amada CPU - I/O Board - Non Returnable
  • DKI-65
    Wiper Ring / Dust Seal
  • DKI-75
    Wiper Ring / Dust Seal / Scraper
  • DV1-24-ABT
    Hydraulic Solenoid Directional Valve
  • DV1-24-ABP
    Hydraulic Solenoid Directional Valve
  • DV1-24-CC
    Hydraulic Solenoid Directional Valve
  • DV3-120-ABP
    Hydraulic Directional Valve
  • DV3-120-ABT
    Hydraulic Directional Valve
  • DV3-120-CC
    Hydraulic Directional Valve
  • E002-4-P03 AMPS 6/3
    Hydraulic Pump Motor for Amada 406/456 Series 400 Saws - Electrical Part - Not Returnable
  • FL7M-2B6-CN
    Proximity Switch for Amada Saws
  • Inverter Drive Kits for Amada 250 Band Saws
    Programmed and Ready to Go Frequency Drive Assembly for the Amada 250 Series Band Saws
  • KCX-1
    9X Feed Counter for Amada HA Series Band Saws
  • KCX-1-MB
    Mounting Base for KCX-1 Counter
  • LS-11-ZB
    Limit Switch - Safety Interlock Switch for Amada Saws
  • LS-11-ZB-C
    Cord Grip for LS-11-ZB Limit Switch
  • LS-11-ZB-K
    Replacement Key for LS-11-ZB Limit Switch
  • M6-Wing Nut
    Brush Shaft Wing Nut for Amada 250 Saws Replaces Part Numbers:
  • MB1215DU
    Brush Shaft Bushing for Amada 250 Saws Replaces Part Numbers: AC-2196-9 or 120096A, 10360519, 10428826, 10205206
  • MB2620DU
    Oiless Metal Bushing Replaces Part Numbers: MB2620DU, 10313331
  • MB6540DU
    Oiless Metal Bushing / Plain Bearing
  • NC-16-00C
    U-Joint - Style 10441905, 10331064, NC-16-00C
  • NC1000A
    New Guide Set for Amada H1000 / H1100W Saws using 3.00" Blade
  • NC1000A-TW3.00
    New Side Guide Set for Amada 1000 Series / Newer Machines using a 3.00" Blade
  • NC1000ABU-TW3.00
    New Backup Pair for Amada HFA1000CII using 3.000" Blade
  • NC1080A-2.00
    New Guide Set for Amada "Gray Market" 1080 Saws using 2.00" Blade
  • NC1080A-2.625
    New Guide Set for Amada H1080 Saws using 2.625" Blade
  • NC1080A-3.00
    New Guide Set for Amada H1080 saws using 3.000" Blade
  • NC1080A-BU
    New Backup Guide (Backup Plate) Pair for Amada H1000, H1100W, H1080, H1300 & H1600 Bandsaws Using either 2.625" or 3.00" Blades
  • NC1080ABU-2.00
    New Backup Pair for Amada "Gray Market" or Japanese Market 1080 Saws using 2.00" Blade
  • NC1300A-2.625
    New Guide Set for Amada H1300 / Older Saws using 2.625" Blade
  • NC16SA
    New Guide Set for Amada HA & HFA 16S Saws / 1.25" Blade
  • NC16SA-1.50
    New Guide Set for Amada HA & HFA 16S Saws / Convert to 1.50" Blade - Requires Modification to Quick Approach Feeler
  • NC16SA-BU
    Backup Guide Pair for Amada HA & HFA16S
  • NC20SA
    New Guide Set for Amada HA20S & HFA20S
  • NC2116A
    New Guide Set for Amada 2116 Saws using 3.00" Blade
  • NC2116A-BU
    New Backup Pair for Amada 2116 Saws
  • NC250A
    Blade Guide Set for Amada 250 Saws Using 1.00" Blade Replaces Part Numbers: 604242, 604243, 604244 & 604254
  • NC250ABU-Super-1
    Super Backup Pair for Amada 250 Saws Using Any Sized Blade Replaces Part Numbers: Backup Roller Chassis 604239
  • NC250ABU-Super-2
    Super Backup Pair for Amada 250 Saws Using Any Sized Blade Replaces Part Numbers: Backup Roller Chassis 110827
  • NC250WA
    Blade Guide Set for Amada 250 Saws Using 1.250" Blade Replaces Part Numbers: 1105279, 1105280, 1105281 & 1105282
  • NC250WA-N
    Blade Guide Set for Amada 250 Saws Using 1.250" Blade Replaces Part Numbers: 1109120, 1109121, 1109122 & 1109123
  • NC330A
    New Guide Set for Amada HFA330 Saws / 1.25" Blade
  • NC400A
    New Guide Set for Amada 400 Series Saws using a 1.25" Blade
  • NC400SA
    New Guide Set for Amada HFA400S & HFA400CNC - 1.50" Blade - Guide Styles 1233185a & 1233186
  • NC400SA-BU
    Backup Guide Kit for Amada HFA400S & HFA400CNC
  • NC401A
    Blade Guide Set for Amada HA16 / HA400 Bandsaws using a 1.25" Blade - Serial numbers starting with 401.
  • NC406WA
    New Guide Set for Amada HA400W & HFA400W / Rack & Pawl Vises - 1.50" Blade - 406 & 456 Series / Styles
  • NC407WA
    New Guide Set for Amada HA400W & HFA400W / Full Stroke Vises - 1.50" Blade - 407 & 457 Series
  • NC450A
    New Side Guide Set for Amada H450H & H450HD Band Saws
  • NC500A
    New Side Guide Set for Amada HA500 & HFA500 Band Saws - Older Saws made before 1999
  • NC500A-2.00
    New Guide Set for Amada HA500 & HFA500 / 2.000" Blade ** This is not a conversion. This guide set is for use on saws manufactured for 2.00" Blade Only
  • NC500A-N
    New Guide Set for Amada HA/HFA500 Series 1.500" Blade
  • NC500ABU-Super
    Super Backup Guide for Amada HA-HFA500 Series
  • NC500SA
    New Guide Set for Amada HFA500S & HFA500CNC / 2.00" Blade
  • NC500SA-BU
    Backup Guide Kit for Amada HFA500S & HFA500CNC / 2.00" Blade
  • NC530A
    New Guide Set for Amada HFA530 (Non Pulse Saw) / 2.625" (65mm) Blade
  • NC530ABU-Super
    Super Backup Pair for Amada HFA530
  • NC600A
    New Guide Set for Amada H600 Saws using 2.00" Blade
  • NC600A-BU
    New Backup Pair for Amada H600
  • NC6050A
    New Guide Set for Amada HKB6050 & HKB6050CNC using a 2.00" Blade
  • NC650A
    New Guide Set for Amada H650HD using a 1.50" Blade
  • NC700A
    New Guide Set for Amada H, HA & HFA 700 / Older Japanese Saws 2.00" Blade
  • NC700A-BU
    New Backup Pair for Amada H, HA & HFA 700 / Older Japanese Saws 2.00" Blade
  • NC702A-2.00
    New Guide Set for Amada HA, HFA 700II & HFA700CII using 2.00" Blade
  • NC702A-2.625
    New Guide Set for Amada HA, HFA 700II & HFA700CII using 2.625" Blade
  • NC702ABU-2.00
    New Backup Pair for Amada HA, HFA700II & HFA700CII using 2.00" Blade
  • NC702ABU-2.625
    New Backup Pair for Amada HA, HFA700II & HFA700CII using 2.625" Blade
  • NC900A
    New Guide Set for Amada H900HD using 2.00" Blade
  • NC900A-BU
    New Backup Pair for Amada H900HD
  • NCCTB400A
    New Guide Set for Amada CTB400
  • NCCTB400A-BU
    New Backup Pair for Amada CTB400 / Replaces Complete OEM Backup Roller Assembly
  • NCHK1000A
    New Guide Set for Amada HK1000 / 2.625" Blade
  • NCHK1000A-BU
    New Backup Guide Pair for Amada HK1000
  • NCHK400A
    New Blade Guide Set for Amada HK400 & HKA400 Saws
  • NCHK801A
    New Blade Guide Set for Amada HK800 & HKA800 Saws Using a 1.500" Blade
  • NCHK821A
    New Blade Guide Set for Amada HK800 & HKA800 Saws Using a 2.000" Blade
  • NCPC330A
    New Guide Set for Amada PC330 Band Saw
  • NCPC430A-1
    New Guide Set for Amada PCSAW430 Saws
  • NCPC430A-2
  • NCPC530A-1
    New Guide Set for Amada PCSAW530AX Saws
  • NCPC530A-2
    New Guide Set for Amada PCSAW530X Saws / 2.625" Blade
  • NCPC700A
    New Guide Set for Amada PCSAW700 Saws - Fits Pulse Cutting 700 Series Only
  • NCPC720A
    New Guide Set for Amada PCSAW720 Saws using a 2.625" Blade
  • NCTVM2.00A
    New Guide Set for Amada TVM Series Plate Saws / 2.00" Blade
  • NCTVM2.625A
    New Guide Set for Amada TVM Series Plate Saws / 2.625" Blade
  • NCTVMA-BU
    New Backup Guide Pair for Amada TVM Series Saws
  • NCVM1200A
    New Guide Set for Amada VM1200 Plate Saws / 1.500" Blade
  • NCVM2500A
    New Guide Set for Amada VM2500 Plate Saws / 1.500" Blade
  • NCVM3800A-2.00
    New Guide Set for Amada VM3800 / 2.00" Blade
  • NCVM3800A-BU
    New Backup Pair for Amada VM3800
  • NCVM420A
    New Guide Set for Amada VM420 / 1.250" Blade
  • ND-1600-C
    U-Joint for Amada Saws - Chip Conveyor
  • ORB-H200-2PC
    Hydraulic Motor / Drives Chip Conveyor on Amada 700 (701) Series Saws - ORB-H200-2PC, 10441901
  • RB00728
    Wear Plate for Amada 250 (650 Serial Numbers) - Without Grooves
  • RB00728-G
    Wear Plate for Amada 250 (650 Serial Numbers) - With Grooves
  • RCB162117
    Roller Clutch
  • RS40SL-42
    Chain for Amada Chip Conveyor Drive
  • SFT-06-150W
    Suction Filter / Hydraulic Filter for Amada Saws
  • SH4-22-110
    Control Relay for Amada 250 - Electrical Item, No Returns
  • SL1-S155-LS
    Limit Switch for Amada Saws
  • SP-2P
    Male Quick Disconnect Fitting for Amada Saws
  • SP-2S
    Female Quick Disconnect Fitting for Amada Saws
  • SRCa3931-5-1
    Magnet Switch - Direct Replacement for Blade Motor Starter on Older Amada 250 Series and any machine calling for SRCa3931-5-1.
  • SWH8-20
    Coil Spring for Amada PCSaw Series
  • SZ-A22
    Auxiliary Contact Set for Fuji Contactor - Fits Amada 250, HK400, 500 Series saws
  • TB24028019
    Oil Seal - Style TB AD5351AO, TB24028019
  • TC-18X38X7
    Oil Seal
  • TL-M2ME2
    Proximity Switch for Amada Saws / Style TL-M2ME2
  • TL-M2ME2-PSK
    Proximity Switch Kit to Replace obsolete Omron Proximity Switch TL-M2ME2
  • TR-20230
    Filter Element for Amada Band Saw Machines Equipped with Oil Cleaner 7921612, 58192805, 10376233, 10376938
  • VCM-SF-20 B1020ML
    Hydraulic Pump for Amada Saws
  • VCM-SF-30B-20
    Hydraulic Pump for Amada 406/456 Series Band Saws
  • WLD2
    Limit Switch
  • ZCB2203-11
    Noise Filter for Amada Bandsaws
  • ZC-D55
    Tappet Limit Switch for Amada HA250 and HA250W Fits Saws equipped with Rack & Pawl Vises
  • ZEN-2
    Limit Switch for Amada Saws or any other machine requiring a ZEN-2 Limit Switch
  • ZL-15G-LSK
    Limit Switch for Amada Saws or any other machine requiring a ZEN-2 Limit Switch
  • ZV2-N-2
    Limit Switch for Amada Saws or any other machine requiring a ZV2-N-2 Limit Switch

 All Prices are Subject to Change - For Absolute Up to Date Pricing Please call 440-377-5657
If PO Price does not match our current sale price, we will create a sales order and send to the purchaser for approval. 
© Copyright 2013, sawguides.com. All rights reserved.

Site Map